FujiGet - A small program to download images from Fuji MX1200 digital cameras.

It was written because I bought a digital camera, then found that the
software I was going to use to control it, FujiControl by Christian Falzon,
didn't work.

This software has been tested with an MX1200 on an A1200 with built in serial
port. It may work with MX500s or MX700s, but I can't guarantee that. In fact,
I can't guarantee it'll work with your MX1200 either. Your mileage may vary.

It was hacked together in a few hours, so bugs are very likely.


Thanks to:
	Thierry Bousch for info gleaned from his fujiplay package, at:
	http://topo.math.u-psud.fr/~bousch/fujiplay.html

	Mamoru Ohno for his protocol analysis, at:
	http://www.yk.rim.or.jp/~mamo/Computer/DS-7/detail-e.html


Any comments, criticisms, bugs or suggestions can be sent to:
	martyn.capewell@ntlworld.com


Usage info:
-----------
FRAME/N/M   = Download these images.
ALL/S       = Download all images.
BASEDIR     = Directory in which to put images. Default is current dir.
LIST/S      = Just list images in camera.
BAUD/K/N    = Connection speed to camera. Default is 57600.
DEVICE/K    = Exec device to use. Default is serial.device.
UNIT/K/N    = Unit number of device. Default is 0.


Homepage -- http://members.xoom.com/legerdemain0/

 PERMSSN    UID  GID    PACKED    SIZE  RATIO     CRC       STAMP          NAME
---------- ----------- ------- ------- ------ ---------- ------------ -------------
[generic]                10090   24148  41.8% -lh5- 3ca5 Feb 18  2001 FujiGet
[generic]                  808    1493  54.1% -lh5- f398 Feb 18  2001 FujiGet.readme
---------- ----------- ------- ------- ------ ---------- ------------ -------------
 Total         2 files   10898   25641  42.5%            Feb 18  2001